1、裁断机速度快，每分钟40－55下冲压。
2、操作方便，无需经验，用户界面简单易会。
3、省材料。自动排版，精度高，节省材料。
4、刀模更换简单，几分钟更换好新刀模。小批量生产同样适用。
5、节省劳动成本，一台机至少替代3到5台普通传统机。而且无需操作者有裁断经验。
6、裁断机性能稳定，使用通用裁断机身，保证不管是单层材料，还是多层，都可以裁切出令
人满意的效果。
操作便捷，界面简单易学
User friendly operator interface，easy tomanipulation；
油压裁断机全自动排版，高精确度，节省材料，比人工节省15-20%
Using auto layout cutting system can save materials to the greatest extent (save 15-20% material than people use the count CAD software)ａnd guarantee a higher precision;
刀模更换便捷，4分钟即可完成，大、小批量生产同样适用
The convenient change of the cutter (use no more than 4 minutes)makes it suitable for both
mass and small batch produce;
操作人员只需上、下物料，效率高，劳动强度低，可替代4-5台传统裁断机
High efficient,low labor intensity.Operating personnel only need to put the material onto
and remove it from the working table (can replace 4-5 traditional cutting machines).
油压裁断机使用通用裁断机身及刀模，裁断能力与传统机型相同，性能稳定
It uses universal cutting machine's frame and cutter,owning the same cutting capacity and
stable performance as the traditional machine.
高安全性，工作过程无需人工干预，杜绝工伤意外发生
The machine working process can run without any manual intervention.The strong security
put an end to the industrial injury.
低能耗，节约成本，以40吨压力为例，整机功率4.5KW，传统裁断机为3.5KW
Low-energy can save the cost for the company.For example,a 40t cutting force,the power
of the whole machine is 4.5KW.
拓荒牛全自动电脑裁断机技术参数标准表
New Bull Auto- computerized leather cutting machine specification
| 技术参数/型号 | NB-1811C | NB-2516C |
| Technical information/model | | |
| 裁断力度 Cutting Force Force | 35T | 40T |
| 外形尺寸 Overall Dimension |
6500*3000*1700MM |
7900*3300*1700MM |
| 工作面积 Cutting area | 1800*1100MM | 2500*1600MM |
| 工作特性 Operarion Properties | 全自动排版，快速更换刀模，可多层裁切 Using auto layout cutting system,quick-change cutterａnd the ability to cut multi tablet make the work more effcient | |
| 裁切速度 Cutting Speed | 35-50次/分钟 | |
| 裁切厚度 Cutting thickness | 0.2-5mm | |
| 裁切材料 Applicable Material | 真皮，人造革，中底板，EVA，胶版，复合材料，白纸板 Genuine leather,Artificial leather,Insole board,EVA,Plastic board,Complex material,White board | |
| 刀具 Cutter | 标准刀模 Standard cutting press knife | |
|
驱动形式 Driving Motor | 伺服电机 Serove Motor | |
| 操作面板 Control panel | 液晶显示 LED disolay | |
|
工作电压和功率 Supply voltage | 交流220V 380V 整机功率4.5KW | |
