采用固定辊筒,升降烫槽、烫辊采用进口无忧簧与进口高级羊毛毡
加压在烫槽上，*的升降系统，使熨烫压力均匀，达到理想的熨烫效果。
●选用*的进口变频器调速系统，熨烫速度可无级调速，运行可靠。
●采用*的线速度设计，熨烫效果好。
●宽烫槽加热形式，高级抛光处理烫床面，快速加热。
●封闭式内置抽湿系统，改善工作环境，外形美观。
●可调熨烫压力控制，适用于不同布草。
●采用*疏水系统，提高热效率，降低使用成本。
●有多种规格可供选择，辊筒直径有1000、800、500mm熨平宽度从2500mm到3200mm，辊筒数目可有1-2个
YC Series Chest Flat Work lroner is another newly developed chest ironer being added into our product line recently.It has fixed roller and elevating chest Rollers are fitted with imported spiral spring cushion support and felt padding is being tightly wrapped round the entire roller surface.Patented elvating mechanism of chest unit allows even ironing pressure being applied through out the whole usable ironing surace and width of the chest,resulting in good flat ironing work.
●Only imported high quality VFD controller is being chosen and incorporated into the contorl system.It allows reliable continuous smooth ironing speed adjustment.
●Utilizes differential front and rear roller speed principle to give a "straightening pull effect" to the fabric during ironing so that good flat work result can be obtained.
●Well polished chest surface finishing with large heating area to allow fast heat-up.
●Fully enclosed humidity control system improves working environment and physical look of the flat work ironer.
●Adjustable ironing pressure to suit different type of flat work items.
●High quality steam trap system which enhances heating efficiency resulting in higher output with lower operating cost.
●Different ironer capacties are available for selection.VIZ;Roller diameter ranging from 1000,800 and 500mm.Ironing width ranging from 2500mm tO 3300mm number of roller range from 1 to2.
