Best-plus loom is the new high speed rapier loom which is adopted the modular design concept with simple structure, good performance, low power consumption, the abundant yarn woven and clear types. This loom is designed specially for the investor and controlled by leading level computer processing system.
1 Main Motor
We adopt the low energy consumption environmental SUMO motor, which uses oil circulation cooling system to lower the temperature. This main motor drives the loom instead of belt, clutch and brake disc to keep the first beating-up of the reed in order to eliminate the uneven weft density. This main motor control the speed of the loom so the speed can be easy adjusted according to the yarn quality. The electronic consumption of this loom is over 10% lower than the common clutch rapier loom.
2 Weft Selecting
Each weft selecting finger is moved by the stepper motor.
The weft selecting fingers go back to the middle position to keep the tension force constant when the rapier clamps the weft yarn. The craft setting is input by the precision program on the display of the electrical box.
3 Rapier Drive Style
We adopt the unitary unilateral guide hook. The rapier is light enough to enter into the shed stably. It reduces the friction with the warp.
4Auto Pick Find
The auto pick find and slow mode is finished slowly by the SRD main motor.
5The lifting time can be set in the display easily.
6Lubrication System
The bearing is lubricated by the oil of Lubricating System with the oil-temperature and oil-pressure sensor. The bearing of beating-up shaft is oiled by the centralized manual oil filler.
7The Warp Tension
Take up and run in device is droved by servo motor. The signal of warp tension sensor keeps warp tension force.
8Electronic dobby may take 20 pieces of heald frames
9 Electronic selvage
The leno selvage is droved by the pendent stepper motor instead of two heald frames.
10Yarn Woven
Discontinuous yarns: Nm200-Nm3
Continuous yarns: 22den-3000den (25dtex-3300dtex)
11 Firm structure and modular design
Two sides van cast iron panels are connected by two beams. This firm structure eliminates the mechanic parts vibration and keep the rapier loom working stably in high speed.
12 Timely effective satisfied technical assistance
There are 3 Maintenance Service Centers to keep 7*24 hours after-sale service for our rapier looms. Besides, we set up hot-line to support our technical assistance.
| TECHNICAL SPECIFICATIONS (Standard) | ||||
| Reed Width | 190,210,230,260,280,320, 340,360,380cm | Run in device | positive electronic run in device | |
| Max width reduction | 35cm each side | Diameter of beam | 800-1000mm | |
| Speed | 550rpm-600rpm | Back rest | single and double back rest | |
| Performance | 1000m/min | Selvage | independent electronic selvage | |
| Weft density | 130picks/cm,can be adjusted by yarns woven | Warp stop device | 6 lines of electronic droppers | |
| Yarns woven | Discontinuous yarn: Nm200-Nm3（Ne120-Ne1.8） | Take up device | positive electronic take up device | |
| Continuous yarn: 22den-3000den(25dtex-3300dtex) | Loom drive | Super SRD main motor driving | ||
| Weft selecting | 1-8 color, every weft selecting finger is moved by the stepper motor. | Pick finding | auto pick finding | |
| Weft control | anti-double wefts function | Control system | controlled by computer with clear LCD and humanity design | |
| Sley | two sides' conjugate cam | Lubrication | booster circulation and filtration system | |
| Shed formation | Staubli electronic dobby | Size | 4659*2031mm | |
