上海信乔泵阀有限公司
上海信乔泵阀有限公司
强力型半衬硬密封陶瓷球阀(CeramicHalf-linedHard-sealingvalve)规格及连接尺寸请参考全衬硬密封陶瓷球阀数据表ConnectionDimensionsaretheSameWiththeCeramicFully-linedHard-sealingBallValve(Page08)特点（Features）阀门壳体经过硬化加固加厚处理
强力型半衬硬密封陶瓷球阀
(Ceramic Half-lined Hard-sealing valve)
规格及连接尺寸请参考全衬硬密封陶瓷球阀数据表
Connection Dimensions are the Same With the Ceramic Fully-lined Hard-sealing Ball Valve(Page08)
特点（Features）
阀门壳体经过硬化加固加厚处理，（超过国家标准GB、JB,美标ANSI的标准数据要求）。分三段二段结构。衬阀门的使用要求制造。
壳体加强，阀门不会因重力而扭曲锁死。（陶瓷阀芯内部要求精度公差超过国家标准的精确度）。阀门流通顺滑，特别为含杂质纤维、粘糊将料、高度颗粒介质而设计。适用于硅粉、镁粉、石灰的输送排放。产品以国标，美标为主。也可依客户需要制造非标产品。
The valve shell is thickened and strengthened(higher than GB,JB,ANSI) And it can be made into or three sections if necessary. As a result ,the valve will not be distorted and locked because of gravity
The high-strength hard seal ceramic ball valve is designed for the media which contains fiber, slurry and high-hardness particle, applicable to pipe-line transportation and emission of Silicon powder ,magnesium powder and lime.
The ceramic ball and seat inside are hard sealed so that the valve can be zero leakage ,economical ,practical and earmarked for foreign trade.
材质表
序号NO | 名称Part name | 材料Material | 序号NO | 名称Part name | 材料Material |
01 | 阀体Body | SS304、A105N | 11 | 阀杆Stem | SS316 |
02 | 阀盖Body cap | SS304、A105N | 12 | 填料Packing | PTFE/Graphit |
03 | 阀球Ball | 结构陶瓷Ceramics | 13 | 填料压套Gland | SS 304 |
04 | 阀座Seat | 结构陶瓷Ceramics | 14 | 碟型弹簧Disc spring | SS 304 |
05 | O型圈O-ring | 丁腈 硅胶 氟胶NBR/VMQ/FKM | 15 | 压板Glａnd flange | SS 304 |
06 | O型圈O-ring | 丁腈 硅胶 氟胶NBR/VMQ/FKM | 16 | 压板螺栓Bolt | SS 304 |
07 | 体盖螺栓Cap bolt | A193-B7/SS304 | 17 | 限位片Stopper | SS 304 |
08 | 体盖螺帽Cap nut | A193-B7/SS304 | 18 | 卡簧Circlip | SS 304 |
09 | 垫片Washer | SS 316 | 19 | 套筒手柄Handle lever | SS 304 |
10 | 轴套Stem sleeve | SS 304 | 20 | 手柄螺栓Hex bolt | SS 304 |
转矩及执行机构连接尺（Torque Values& Actuator mounting kits dimensions）
规格/SIZE | 法兰型号 Flange type | H | H1 | □AхA | ΦB | ΦC | ΦD | EхE | |
DN | NPS | ||||||||
DN15 | 1/2″ | F05 | 89 | 12 | 9х9 | Φ23 | Φ50 | Φ8 | 66х66 |
DN20 | 3/4″ | F05 | 94 | 12 | 9х9 | Φ23 | Φ50 | Φ8 | 66х66 |
DN25 | 1″ | F05 | 94 | 12 | 9х9 | Φ23 | Φ50 | Φ8 | 66х66 |
DN32 | 1-1/4″ | F05 | 102.5 | 14 | 11х11 | Φ28 | Φ50 | Φ8 | 66х66 |
DN40 | 1-1/2″ | F05 | 107.5 | 15 | 11х11 | Φ28 | Φ50 | Φ8 | 66х66 |
DN50 | 2″ | F07 | 135 | 15 | 14х14 | Φ46 | Φ70 | Φ10 | 99х99 |
DN65 | 2-1/2″ | F07 | 145.8 | 18 | 19х19 | Φ46 | Φ70 | Φ10 | 99х99 |
DN80 | 3″ | F07 | 160 | 20 | 19х19 | Φ46 | Φ70 | Φ10 | 99х99 |
DN100 | 4″ | F10 | 196.5 | 22 | 22х22 | Φ60 | Φ102 | Φ12 | 120х120 |
DN125 | 5″ | F10 | 213.3 | 27 | 27х27 | Φ60 | Φ102 | Φ12 | 120х120 |
DN150 | 6″ | F10 | 235 | 27 | 27х27 | Φ60 | Φ102 | Φ12 | 120х120 |
压力实验（Pressure Testing）
规格 | DN | DN15 | DN20 | DN25 | DN32 | DN40 | DN50 | DN65 |
NPS | 1/2″ | 3/4″ | 1″ | 1-1/4″ | 1-1/2″ | 2″ | 2-1/2″ | |
扭矩Torche Values/N.M | 空转（N.M）ldling | 5 | 10 | 10 | 15 | 15 | 25 | 30 |
气压0.6Mpa | 10 | 15 | 15 | 10 | 20 | 30 | 55 | |
规格 | DN | DN80 | DN100 | DN125″ | DN150 | |||
NPS | 3″ | 4″ | 5″ | 6″ | ||||
扭矩Torche Values/N.M | 空转（N.M）ldling | 35 | 45 | 45 | 60 | |||
气压0.6Mpa | 70 | 90 | 100 | 100 |
以上数据是在实验条件下测得，可能与阀门实际使用工况有所不同，仅供参考，建议与我司联系以应用正确的执行机构。
The date shown above was acquired under test conditions that may be very different form the actual site conditions, and for your reference ,it is recommended to contact us to help you select the suitable actuator.
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
纺织服装机械网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
