沥青粘韧性测定仪是根据**交通行业标准JTJ052《公路工程沥青及沥青混合料试验规程》中T0624《沥青粘韧性试验》和石化行业标准SH/T0735《沥青粘韧性试验》的要求设计制造。本仪器兼容交通行业和石化行业两个试验标准的要求，拉伸长度可选择300mm或610mm；拉伸试验机采用高精度丝杆拉伸设计，运行平稳可靠，测量精度高；
Asphalt viscosity and toughness tester is designed and manufactured according to the requirements of T0624 "Asphalt Viscosity and Toughness Test" in the ** Transportation Industry Standard JTJ052 "Highway Engineering Asphalt and Asphalt Mixture Test Rules" and the petrochemical industry standard SH / T0735 "Asphalt Viscosity Test" This instrument is compatible with the requirements of the two test standards of the transportation industry and the petrochemical industry. The tensile length can be selected from 300mm or 610mm. The tensile testing machine adopts high-precision screw rod tensile design, which runs smoothly and reliably with high measurement accuracy.
沥青粘韧性测定仪技术指标:
★拉伸速度： 500mm/min±10mm；
★大加载能力： 1000N；
★拉力非线性误差： ＜0.5％；
★拉力采样间隔： 0.5mm；
★大拉伸长度： 610mm；
★供电电源： AC220V±10％，50Hz；
★整机功耗： 不大于500W；
★外型尺寸： 520×400×1220mm
★重量：75kg
Asphalt viscosity and toughness tester technical indicators:
★ Stretching speed: 500mm / min ± 10mm;
★ Large loading capacity: 1000N;
★ Tensile non-linear error: <0.5%;
★ Sampling interval of pulling force: 0.5mm;
★ Large stretch length: 610mm;
★ Power supply: AC220V ± 10%, 50Hz;
★ Overall power consumption: not more than 500W;
★ External dimensions: 520 × 400 × 1220mm
★ Weight: 75kg
沥青粘韧性测定仪操作规程：
★仔细阅读使用说明书,了解和熟悉仪器的操作程序和操作要求.
★标准拉力检测系统按上述方法连接好.
★将仪器按说明书所规定的要求接通电源,开机,使仪器处于正常的工作状态.
★连接好计算机,安装好本仪器配的操作软件,使计算机处于正常运行状态.
★设计好检定程序和检定点.
★利用操作面板上"上行档"的"启动"和"暂停"键作
Asphalt viscosity tester operating procedures:
Read the instruction manual carefully to understａnd and be familiar with the operating procedures and requirements of the instrument.
The standard tensile testing system is connected as described above.
Connect the instrument to the power supply according to the requirements specified in the instruction manual, and turn it on so that the instrument is in a normal working state.
Connect the computer and install the operating software of the instrument so that the computer is in a normal operating state.
Design the verification procedures and points well.
★ Using the "Start" and "Pause" keys of "Upshift" on the operation panel
沥青粘韧性测定仪仪器成套：
★粘韧性试验器 （含拉伸半球圆头和定位支架组件、定位螺母、试样容器各一件）
★计算机 （另配打印机一台）
★串口通讯线
可选配件：
HWY-10多功循环恒温水浴
Asphalt Viscosity Tester Instrument Set:
★ Visco toughness tester (including a tensile hemisphere round head and a positioning bracket assembly, a positioning nut and a sample container each)
★ Computer (with one printer)
★ Serial communication cable
Optional accessories:
HWY-10 multi-function circulating constant temperature water bath
