纳米孔气凝胶复合绝热制品测厚仪产品简介：
纳米孔气凝胶复合绝热制品测厚仪是**检测仪器，适用于由纳米孔气凝胶复合绝热制品厚度的测量。使用前务必仔细阅读说明书。并由**实验人员操作，以避免操作不当引起的伤害。如需了解更多资料请与我公司客服人员联系，由上海荣计达仪器科技有限公司提供，具有结构简单、操作方便、测量范围大等特点。设备质保期一年，一年内产品如有质量问题，供方负责免费维修。如果因操作不当或者人为损坏，我公司亦应提供维修、更换服务，由此产生的费用我公司会酌情收取。
I. Nanoporous aerogel composite thermal insulation product thickness gauge Product introduction:
Nanoporous aerogel composite thermal insulation product thickness measuring instrument is a testing instrument suitable for measuring the thickness of nanoporous aerogel composite thermal insulation products. Be sure to read the instructions carefully before use. It is operated by ** experimental personnel to avoid injury caused by improper operation. For more information, please contact our customer service staff, which is provided by Shanghai Rongjida Instrument Technology Co., Ltd. It has the characteristics of simple structure, convenient operation and large measurement range. The warranty period of the equipment is one year. If the product has quality problems within one year, the supplier is responsible for free maintenance. If due to improper operation or man-made damage, our company should also provide repair and replacement services, and the costs incurred by our company will be charged at our discretion.
纳米孔气凝胶复合绝热制品测厚仪技术参数：
★压板压强：350Pa。
★测量厚度：0～30mm。
★分度值：0.1mm。
★试件尺寸：200×200mm。
★外型尺寸：250×250×260mm。
★百分表量程：0～10mm。
★精度：0.01mm。
★压板尺寸：200×200mm。
Technical parameters of thickness measuring instrument for nanoporous aerogel composite thermal insulation products:
★ Platen pressure: 350Pa.
★ Measured thickness: 0 ～ 30mm.
★ Dividing value: 0.1mm.
★ Test piece size: 200 × 200mm.
★ External dimensions: 250 × 250 × 260mm.
★ Dial indicator range: 0 ~ 10mm.
★ Accuracy: 0.01mm.
★ Platen size: 200 × 200mm.
纳米孔气凝胶复合绝热制品测厚仪使用方法：
Third, the use of nano-hole aerogel composite thermal insulation product thickness gauge:
★按照图样，裁取200×200mm试样三个
★将压板放到试验台上，调整可调支架，设置百分表初始位置。
★轻轻抬起测厚仪的百分表，将被测试样放到底板与压板之间，并对齐。
★轻轻放下测厚仪的百分表，使其与试样上的压板接触，待百分表读数稳定后读数，精确到0.1mm。此时读数减去初始数据，即为试样厚度。
★ According to the drawing, cut out 200 × 200mm three samples
★ Put the pressure plate on the test bench, adjust the adjustable bracket, and set the initial position of the dial indicator.
★ Gently lift the dial indicator of the thickness gauge, place the test sample between the bottom plate and the pressure plate, and align them.
★ Gently lower the dial indicator of the thickness gauge so that it is in contact with the pressure plate on the sample. After the dial indicator reading stabilizes, the reading is accurate to 0.1mm. At this time, the reading minus the initial data is the thickness of the sample.
GB T 34336-2017 纳米孔气凝胶复合绝热制品
压板重量1400-1428-1457克
GB T 34336-2017 Nanoporous aerogel composite thermal insulation products
Platen weight 1400-1428-1457 g
