上海荣计达仪器科技有限公司**经营水泥实验仪器、混凝土实验仪器、公路土工实验仪器、干粉砂浆保温砂浆实验仪器、沥青防水材料实验仪器、油漆涂料实验仪器、无损检测等实验仪器。**经营水泥实验仪器、混凝土实验仪器、公路土工实验仪器、干粉砂浆保温砂浆实验仪器、沥青防水材料实验仪器、油漆涂料实验仪器、无损检测等实验仪器。公司产品凭借过硬的质量、完善的售后服务、合理的价格各大院校、检测单位、建材企业、工程建设单位。在消费者当中享有较高的地位和良好的口碑，用户遍布国内近三十个省市、自治区，并远销国外，与用户建立了长期稳定的合作关系。公司实力雄厚，重信用、守合同。有健全的管理制度和完善健全的质量管理体系。并有反应迅速、服务周到的售后服务系统。我们将不懈努力、一如既往以优异的品质为客户服务。
Shanghai Rongjida Instrument Technology Co., Ltd. ** operates cement experiment equipment, concrete experiment equipment, highway geotechnical experiment equipment, dry mortar thermal insulation mortar experiment equipment, asphalt waterproof material experiment equipment, paint coating experiment equipment, non-destructive testing and other experimental equipment. ** Operating cement experiment equipment, concrete experiment equipment, highway geotechnical experiment equipment, dry mortar thermal insulation mortar experiment equipment, asphalt waterproof material experiment equipment, paint coating experiment equipment, non-destructive testing and other experimental equipment. Company products rely on excellent quality, perfect after-sales service, reasonable prices sell well in major universities, testing units, building materials enterprises, engineering construction units. It enjoys a high status and a good reputation among consumers, and has customers in nearly 30 provinces, cities, and autonomous regions in China, and has been exported to foreign countries. It has established long-term and stable cooperative relationships with users. The strength of the company, credit and contract compliance. Have a sound management system and a sound quality management system. And has a responsive and thoughtful after-sales service system. We will make unremitting efforts to serve our customers with excellent quality as always.
矿物料粘附性试验机是**检测仪器，依照标准GB/T 328.17-2007《建筑防水卷材试验方法》“第17部分：沥青防水卷材矿物料粘附性"B法研制的。由上海荣计达仪器科技有限公司提供，可在一定负载和刷洗次数下，将被测矿物卷材试件刷洗至标准要求，以备矿物料粘附性的测定。
The mineral material adhesion tester is a testing instrument developed in accordance with the standard GB / T 328.17-2007 "Test Methods for Building Waterproofing Coil" "Part 17: Asphalt waterproofing material mineral material adhesion" B method. Provided by Shanghai Rongjida Instrument Technology Co., Ltd., under certain load and brushing times, the test specimens of mineral coils can be brushed to the standard requirements for the determination of the adhesion of mineral materials.
矿物料粘附性试验机技术参数：
★刷子部件重量：2268±7g
★置数范围：0～9999
★刷子部件往复工作频率：50次/分
★电源电压：220V 50Hz
★外形尺寸：600㎜×420㎜×360㎜
Technical parameters of mineral material adhesion tester:
★ Brush part weight: 2268 ± 7g
★ Setting range: 0 ～ 9999
★ Brush parts reciprocating working frequency: 50 times / minute
★ Power supply voltage: 220V 50Hz
★ Dimensions: 600㎜ × 420㎜ × 360㎜
矿物料粘附性试验机使用方法：
★将仪器平稳放在工作台上。
★接通电源，打开开关，计数器显示0，按——键，显示器闪烁，按向上箭头，数值增加，按向右箭头二位数值闪烁，按向上箭头，数值增加，以此类推，调整好，10秒后闪烁停止，数值存入系统内，调整好所需数值后，仪器便可正常工作，O键是清零复位键。
★将刷子提前锁紧，将试件放置在压脚下压紧，放下刷子。
★按启动键，仪器开始工作。计数器自动计数，达到所设置次数后停机，如需再次启动，按O键，计数器清零，机器再次启动。
★取下试讲用真空吸尘器在试件表面移动，吸去落下的颗粒。
★测定每个试件的质量。
How to use mineral material adhesion tester
★ Place the instrument on the workbench stably.
★ Turn on the power, turn on the switch, the counter displays 0, press the —— key, the display blinks, press the up arrow to increase the value, press the right arrow to flash the two digits, and press the up arrow to increase the value, and so on. After 10 seconds, the flashing stops and the value is stored in the system. After adjusting the required value, the instrument can work normally. The O key is the reset key for clearing.
★ Lock the brush in advance, place the test piece under the presser foot, and lower the brush.
★ Press the start key, the instrument starts to work. The counter counts automatically and stops after reaching the set number of times. If you need to start again, press the O key to clear the counter to zero and the machine starts again.
★ Remove the test piece and use a vacuum cleaner to move on the surface of the test piece to suck out the falling particles.
★ Determine the quality of each test piece.
矿物料粘附性试验机注意事项：
★试验完毕后关闭电源，以免计时器长时间通电造成不必要的损坏。
★使用完毕后，搽拭干净，罩好防尘罩。
★仪器电源有效接地。
Notes on Mineral Adhesion Tester
★ Turn off the power after the test to avoid unnecessary damage caused by the timer being powered on for a long time.
★ After use, wipe clean and cover the dust cover.
★ The instrument power is effectively grounded.
