一、产品简介：
电动板材抗折试验机适用于非金属板材抗折强度试验，试验机外观精美、工艺细腻，采用伺服控制系统，可实现匀速加载效率高稳定性好。采用触摸屏控制，友好的人机操作界面。仪器内部设有行程限位和正负力值过载保护功能。具有测试速度可调、负荷测量精度高、操作方便等特点。适用于工厂、建筑工程质量检测站、建筑公司、产品质量检验所、科研院校、道路桥梁现场等，生产检验、开发研究等领域。
Product introduction:
The electric plate bending tester is suitable for the bending strength test of non-metallic plates. The tester has a beautiful appearance and delicate technology. It adopts a servo control system to achieve uniform loading efficiency and high stability. Touch screen control, friendly man-machine operation interface. The instrument is equipped with internal travel limit and positive and negative force value overload protection functions. It has the characteristics of adjustable test speed, high load measurement accuracy, and convenient operation. Suitable for factories, construction engineering quality inspection stations, construction companies, product quality inspection institutes, scientific research institutions, roads and bridges, etc., production inspection, development and research fields.
二、技术参数：
★A大试验力：20KN
★有效检测范围：A大实验力的1%-%
★负荷分辨率：1N
★负荷测量精度：示值的±1%以内
★试验速度：1mm-50mm/min
★试验空间范围：150mm
★试件范围：1300×600mm
★驱动方式：伺服电机驱动
★电源：单相交流220V / 50Hz，电机功率550 W
★外形尺寸：1400×1200×1500mm
★重量:220KG
Technical parameters:
★ A large test force: 20KN
★ Effective detection range: 1%-% of large experimental force
★ Load resolution: 1N
★ Load measurement accuracy: within ± 1% of the indicated value
★ Test speed: 1mm-50mm / min
★ Test space range: 150mm
★ Test piece range: 1300 × 600mm
★ Drive mode: servo motor drive
★ Power supply: single-phase AC 220V / 50Hz, motor power 550 W
★ Dimensions: 1400 × 1200 × 1500mm
★ Weight: 220KG
三、符合标准；
DB37/T5067-2016 FS外模板现浇混凝土复合保温系统应用技术规程
GBT19631-2005 玻璃纤维增强水泥轻质多孔隔墙条板
GBT 9772-2009 纤维水泥波瓦及其脊瓦
GBT7019-2014 纤维水泥制品试验方法
JCT851-2008 钢丝网石棉水泥小波瓦
JCT746-2007混凝土瓦
GBT 3810.4-2016 陶瓷砖试验方法 第4部分：断裂模数和破坏强度的测定
JC899-2002混凝土路缘石
GBT 9775-2008 纸面石膏板
JC∕T 799-2016 装饰石膏板
JCT997-2006 装饰纸面石膏板
GBT 17657-2013 人造板及饰面人造板理化性能试验方法
GBT9966.2-2001 天然饰面石材试验方法 第2部分：干燥、水饱和弯曲强度试验方法
GBT30100-2013建筑墙板试验方法
3. Meet the standards;
DB37 / T5067-2016 FS external formwork cast-in-place concrete composite thermal insulation system application technical regulations
GBT19631-2005 glass fiber reinforced cement light porous partition board
GBT 9772-2009 fiber cement wave tile and its ridge tile
GBT7019-2014 Test method for fiber cement products
JCT851-2008 steel wire asbestos cement small wave tile
JCT746-2007 concrete tile
GBT 3810.4-2016 Test methods for ceramic tiles-Part 4: Determination of modulus of rupture and breaking strength
JC899-2002 concrete curb stone
GBT 9775-2008 plasterboard
JC ∕ T 799-2016 decorative plasterboard
JCT997-2006 decorative plasterboard
GBT 17657-2013 Test method for physical and chemical properties of wood-based panels and facing wood-based panels
GBT9966.2-2001 Test methods for natural facing stone. Part 2: Test method for dry, water saturated flexural strength
GBT30100-2013 Test method for building wallboard
四、仪器特点：
★嵌入式Windows操作系统环境的测控软件，实时显示测试数据、曲线、试验过程自动控制，试验结束自动求取试验结果，软件简便易用；
★采用闭环控制，可实现力速度、位移速度、编程三种加载方式，可满足不同标准试验要求。
★采用伺服控制系统，**控制检测过程。
★采用触摸屏控制，便于人机对话。
★试验机内部设有行程限位和正负力值过载保护功能，防止误操作引起试验机的损坏。
Fourth, the characteristics of the instrument:
★ Embedded Windows operating system environment measurement and control software, real-time display of test data, curves, and automatic control of the test process. The test results are automatically obtained after the test.
★ Adopting closed-loop control, it can realize three loading methods: force speed, displacement speed, and programming, which can meet different standard test requirements. Zh
★ Servo control system is adopted to control the detection process. Zh
★ Using touch screen control for easy man-machine dialogue.
★ The travel machine is equipped with travel limit and positive and negative force value overload protection functions to prevent damage to the test machine caused by misoperation.
