自动检重秤技术参数
Technical specification of the checkweigher
載荷maximum load 600 g
分辨率resolution d = 0.1 g
精度accuracy +/- 0.2 g
(与产品的尺寸、重量，行为、产量及使用环境有关)
(dependent on product size, weight and behaviour, throughput and environmental influence)
产量 throughput, up to 120件/分钟 120weighings per minute
量程 weighing range 0 - 600 g
传感器 weighcell 数字信号，免维护，性能稳定，温度影响很小。
, digital, maintenance free, temperature stable
机械性能 Mechanical specification
产品输入 输入传输带，安装在检重秤的基架上，铝制，400/150mm (轴距/皮带宽)
infeed of products infeed conveyor integrally mounted with the checkweigher
made of black anodized aluminium
400/150 mm (distance between axles/belt width)
称量传输带 铝制，200/150mm (轴距/皮带宽)
weighing conveyor made of black anodized aluminium
200/150 mm (distance between axles/belt width)
产品输出 输出传输带，安装在检重秤的基架上，铝制，400/150mm (轴距/皮带宽)
outfeed of products outfeed conveyor integrally mounted with the checkweigher
made of black anodized aluminium
400/150 mm (distance between axles/belt width) l
电机 直流无刷马达，集成控制电路，速度可通过触摸屏连续可调。
motor DC brushless motor with integrated control circuitry; speed continuously variable at the touch of a key.
剔除设备 吹气式，用于剔除超重/欠重产品，安装于输出传输带上
(超重剔除动作可关闭)
剔除方向：向操作者 (请确认)
rejection device sorting of over- and underweights by air jet mounted on outfeed conveyor (rejection of overweights can be switched off)
(rejection towards the operator side) (please confirm)
压缩空气 4-8 bar，气耗量：约50 升/小时
compressed air 4-8 bar, air consumption approx. 50 l/hour
生产线高度 850 mm (请确认)，标准高度570-1100mm
line height 850 mm (please confirm), standard from 570-1100mm.
地脚螺栓 不锈钢材质，高度调节：+/-30 mm
foot screws made of stainless steel, height adjustable +/-30 mm
传输方向 从左向右 (操作者面对显示屏) (请确认)
transport direction from left to right (see from the operator’s side) (please confirm)
使用环境 为确保达到精度，检重秤的安装地点应避免震动及空气的流动
ambient conditions to ensure maximum accuracy, the location where the checkweigher is to be installed must be free of vibrations and air draft as far as possible
材质/设计 不锈钢立柱支撑，立柱内安装电子、电气和驱动控制系统
material/design stainless steel/self supporting housing as a columnar cabinet, incorporating the electric and electronic systems and the drive control system.
防护等级 标准：IP54
ingress protection Standard: IP54
电气性能 Electrical specification
电气安装 遵循VDE0100和0113
electrical installations corresponding to the VDE guidelines 0100 and 0113
电源要求 115/230V，单相，N，PE，50Hz
power supply 115/230 V, single-phase, N, PE, 50/60 Hz
功率wattage 500 VA
使用温度 0 - 40 ° C
temperature range 0 - 40 ° C
注意 自动检重秤的供电电源应单独布线，以确保没有电气和电磁干扰
note The power supply of the checkweigher must be interference-free (EMC,HF) to ensure trouble-free operation.
信号 无源触点输出potential-free outputs (designed as “make contact")：
signals - 检重秤准备运行 weigher is ready
- 传输带运行 conveyors are running
称重显示仪 Weighing terminal
显示仪外壳 镶嵌在控制柜上
terminal housing integrated in the control cabinet
显示屏 Screen
显示屏 高亮度、高对比度彩色液晶触摸显示屏，5.7“
display bright, high-contact colour touchscreen LC display, size 5.7"
功能 分辨率1/4VGA
Function resolution 1/4VGA
显示 - 当前产品；标准重量和皮重
- 当前操作员；时间和日期
Indication - current article; nominal weight and tare
- current operator; time and data
当前重量值 大字显示毛重或大字显示净重。
Current weight value large gross weight ondication,or large net weight indication
操作区 密码登入和置零
Action section for log-in and re-zeroing
菜单部分Menu section
操作指导 触摸屏上显示明晰的操作方法
operator guidance intuitive operation approach by touchscreen display
软开关softkey 控制电机开和关/for motor start/stop
HOME键HOME key 用于快速退回主页面/for quick jump back to the basic screen
MENU键MEMU key 用于打开屏幕菜单/for opening the list of screen
HELP键HELP key 用于打开帮助菜单/for context-sensitive help
前进/后退键 用于在不同页面间浏览
FORWARD/
BACKWARD key for moving from one screen to another
系统信息 按时间和日期显示的系统历史信息
Syetem message history of last system message with date/time
基本显示界面Basic screen
分类计数 重量分类显示：每个重量区域内的个数；当前重量分类指示。
Counter levels indication of the weight classification: counter levels of each weight zone and indicate the current weighing
信息栏 系统状态和系统信息
Info line system status and system message
