江阴韵翔光电技术有限公司
江阴韵翔光电技术有限公司
DLC pro：数字控制用于可调二极管激光器的全数字控制器
DLC pro：数字控制用于可调二极管激光器的全数字控制器
极低的噪音和的控制
方便的本地和远程操作
智能锁定功能
DLC pro是一个平台，可驱动TOPTICA的所有可调二极管激光器：适用于所有波长的控制器。
二极管激光器的性能在很大程度上取决于其控制器DLC pro是一个基于数字基础的二极管激光控制器，DLC pro是一个基于数字基础的二极管激光控制器，它对获得所有关键参数的优良性能至关重要:窄激光线宽的低电流噪声，稳定运行的出色的温度控制和频率调谐的压电控制。
为了释放此高性能控制器的全部潜能，提供了直观的用户界面：借助触摸屏和旋钮，可以轻松调整扫描，放大观察到的功能，激活频率锁定等。数字基础还可以实现全面的远程控制，包括Windows计算机的GUI和命令界面。该接口对所有编程语言开放；提供了Python SDK。
许多应用需要参考激光的频率。 TOPTICA提供满足所有需求的解决方案：便捷的软件解决方案DLC pro Lock直接集成到DLC pro中，而FALC pro提供了高性能锁定。
DLC pro是二极管激光控制器的基准：具有优良性能的硬件，以以前没有的便利性运行。
Python 支持 | 作为TOPTICA的Laser SDK的一部分，我们提供了DLC pro的Python支持，可通过pip安装轻松获得。 该软件包又Python软件包索引（PyPI）提供。 |
PC GUI | DLC pro的直观PC GUI允许从计算机进行全部控制（需要Windows 8或更高版本）。 只需连接到实验室中的任何激光器，并从其当前设置开始。 |
以太网络 | 将DLC pro连接到局域网可以从计算机进行远程控制，例如 通过PC GUI和命令界面。 支持DHCP和手动IP配置。 |
LabVIEW示例 | 在示例程序中演示了将DLC pro的控件集成到LabVIEW中的方法，请参见下面 |
气压补偿 | 此功能可通过校正测得的气压变化来提高稳定性，并使波长更稳定。 |
配置管理器 | 配置管理器允许返回以前保存的激光设置。尝试新的设置，例如锁定参数会被大大简化。 |
功率稳定 | 作为每个激光器的一部分，可以激活功率稳定反馈环路。 可以达到的带宽会在下表的当前控制模块CC-500和CC-5000的规格中列出。 |
宽扫描模式 | 宽扫描允许记录和显示高分辨率光谱扫描。 这对于CTL和DFB pro系统尤为重要，可以在激光二极管的整个波长范围内进行扫描。 |
屏幕截图 | 只需按一下按钮，即可将触摸屏界面的屏幕快照保存到USB驱动器。 |
General / Main Control MC
General / MC | |
Operator Controls | Touch Display, 10 push buttons, 4 knobs, 1 key switch |
Display | 7 inch, 800 x 480 pixels, 262 k colors |
Touch panel | Projective capacitive (PCT) with multi-touch capability |
Interfaces | Ethernet and USB |
Current Control CC-500 & CC-5000
Current Control CC-500 | Current Control CC-5000* | |
Max. laser current | 2x 245 mA or 1x 490 mA (selectable) | 5000 mA |
Max. laser voltage | 7 V @ 360 mA, 5 V @ 490 mA | 3.5 V |
Smallest current step | 0.015 μA | 5 μA |
Current noise density | 280 pA / sqrt(Hz) @ 1 kHz | 120 nA / sqrt(Hz) |
Low frequency current noise (0.1 Hz ... 10 Hz) | < 50 nA p-p | 10 μA p-p |
Temperature coefficient of laser current | <3 ppm / K typ. after > 1 h warm-up | |
Long-term stability of laser current | < 100 ppm / sqrt(khrs) after > 1 h warm-up | |
Modulation bandwidth (-3dB, 45°) | Between 15 kHz and 30 kHz | 100 Hz |
Achievable power stabilization bandwidth | DL pro: 10 kHz, CTL: 4 kHz | TA pro: 4 kHz, SHG pro: 1 kHz |
* For TA pro systems two CC-5000 can be combined to drive one amplifier chip at a higher current. | ||
Temperature Control TC
Temperature Control TC | |
Max. TEC current | 3 A |
Max. TEC voltage | 3 V @ 3 A / 12 V @ 3 A |
Smallest set temperature step | 50 μK |
Act. temperature noise (100 μHz ... 1 Hz) | < 300 μK p-p |
Repeatability of actual temperature | < 0.001 K after > 1 h warm-up |
Temperature coeff. of actual temperature | < 140 ppm K / K after > 1 h warm-up |
Piezo Control PC
Piezo Control PC | |
Piezo voltage range | -1 V ... +140 V |
Max. piezo current (charge / decharge) | 25 mA |
Smallest piezo voltage step | 0.01 mV |
Voltage noise density | 140 nV / sqrt (Hz) @ 1 kHz |
Temperature coefficient of piezo voltage | < 40 ppm / K |
Small signal bandwidth | 3 kHz (0 load) |
Inputs / Outputs
Inputs / Outputs | |
Analog inputs (BNC) | 2x (24 bit, DC .. 300 kHz) |
2x (16 /10 bits, DC .. 300 kHz / 1.7 MHz) | |
Input range, impedance | -4 V ... + 4V, 10 kOhm |
Analog outputs (BNC) | 2x (16 bits, DC .. 300 kHz) |
Output range, impedance | -4 V ... + 4V (no load), 50 Ohm |
Digital inputs** | 4x TTL, 10 kOhm, Sub-HD 15-pin |
Digital outputs** | 4x TTL, 50 kOhm, Sub-HD 15-pin |
** Optional break-out cable with 8 SMB connectors available. | |
Environmental, Power Supply PS
Environment / Supply | |
Voltage requirements | 100 - 240 V~, 50 / 60 Hz |
Power requirements | 250 W max., typ. 35 W, no active cooling fans |
Size (H x W x D) | 154 mm x 450 mm x 348 mm |
Weight | 8.0 kg (with MC, CC-500, PC, TC) |
Operating temperature | 5 °C ... 40 °C |
Transport temperature | 0 °C ... 40 °C |
Relative humidity | 80 % for up to 31 °C, decr. lin. to 50 % at 40 °C |
DLC ext
The DLC ext allows extending the DLC pro with TOPTICA’s well-established fast locking modules. | |
Number of possible modules | 2 |
Supported modules | PDD 110,FALC 110,mFALC 110,DigiLock 110 |
Size (H x W x D) | 131 mm (+67 mm) x 184 mm x 286 mm |
Power supply | 90 - 264 VAC (47 - 63 Hz), external, automatic mains voltage detection |
[Translate to Chinese:] TOPTICA tunable diode lasers: Available wavelengths and corresponding output power
[Translate to Chinese:] Linewidth measurement DLC DL pro: Delayed self-heterodyne linewidth measurement. Due to the long coherence length periodic modulation appears. The linewidth is obtained from the modulation depth.
[Translate to Chinese:] Frequency noise measurement DLC DL pro: Frequency noise density of the laser light created with a DLC DL pro and a SYST DL pro
[Translate to Chinese:] DLC pro current noise measurement: Comparison of the current noise density of the current control modules.
[Translate to Chinese:] DLC ext: allows for equipping DLC pro driven laser systems with high performance locking modules
[Translate to Chinese:] DLC pro temperature stability measurement: Temperature of a DL pro laser head connected to a laser control electronics, which is located in a climate chamber and exposed to the temperature sequence shown by the blue line.
[Translate to Chinese:] DLC pro: Breakout cable for digital signals K DLC/DIGITAL I/O
ØFALC pro: External high performance locking modul for frequency locking, e.g. in phase locks or locks frequency combs or to reference cavities if combined with PDH/DLC pro.
ØPDH/DLC pro: Built-in module for the DLC pro to generate error signals for Pound-Drever-Hall locks.
ØDLC pro Lock: Software license for DLC pro
Applications
ØAtom Laser Cooling & Trapping
ØIon Laser Cooling & Trapping
ØBEC / Degenerate Fermi Gases
ØOptical Clocks
ØRydberg Excitation
ØOptical Pumping & EIT
ØFundamental Constants
ØInterferometry
ØQuantum Cryptography
ØQuantum Information
ØQuantum Dots & Microcavities
ØMagnetic Field Measurement
公司介绍
德国Toptica公司为科研及工业应用开发并制造激光系统，产品线包括二极管激光器，超快光纤激光，太赫兹系统以及频率梳等。TOPTICA激光器优良的性能表现，可靠性以及使用寿命收到各方OEM客户，科学家以及多位诺贝尔奖获得者的首肯。
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
纺织服装机械网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
