一，微机控制静载锚固试验机产品简介：
试验机是专业检测仪器，专用钢绞线、静载锚固强度试验之用。试验机采用微机控制电液伺服加载和手动液压加载，主体与控制柜分置的设计，液压加荷有微机显示计算储存功能打印数据报告。大大降低了故障率。采用进口比例阀，稳定性高，加荷速度平稳。WINDDOWS版操作软件简单易用，十分钟学会。
First, the product introduction:
The testing machine is a professional testing instrument, special steel strａnd and static load anchoring strength test. The testing machine adopts microcomputer to control electro-hydraulic servo loading and manual hydraulic loading. The main body and control cabinet are designed separately. The hydraulic loading has a microcomputer display calculation storage function print data report. Greatly reduced the failure rate. The imported proportional valve has high stability and stable loading speed. The WINDDOWS version of the operating software is easy to use and learns in ten minutes.
二，微机控制静载锚固试验机技术参数：
■A大试验力： 6500KN
■测力范围： 4%-A（全程不分档，等效三档）
■示值准确度（试验力）： 伏于示值的±1%
■位移测量范围： 0-200mm
■示值准确度（位移）： ±1%
■重复性： ±0.5%
■相对分辨率： ±0.5%
■活塞行程： 200mm
■拉伸间距： 3400mm
■功率： 4.4KW
■外形尺寸：主机：5030×700×2060mm
控制柜1180×800×1310mm
■净重：3500Kg
Second, technical parameters:
■A large test force: 6500KN
■Measurement range: 4%-A (the whole process is not divided, equivalent to the third gear)
■Indication accuracy (test force): ±1% of the indicated value
■ Displacement measurement range: 0-200mm
■Indication accuracy (displacement): ±1%
■ Repeatability: ±0.5%
■ Relative resolution: ±0.5%
■Piston stroke: 200mm
■ Stretching distance: 3400mm
■Power: 4.4KW
■Dimensions: Main unit: 5030×700×2060mm
Control cabinet 1180×800×1310mm
■Net weight: 3500Kg
三，微机控制静载锚固试验机结构：
该卧式静载锚固机由主机和控制柜（含油源、泵站）及微机控制系统三部分组成。
■主机：由负荷传感器、机架、吊架、吊梁、围板、千斤顶及垫板、锚板、锚具等组成。其中锚板、锚具及垫板随做不同的试验根数而更换不同的锚板和锚具。
■控制柜：由控制面板、电机泵、送油阀、回油阀、截止阀、电磁换向阀、电液伺服数字阀、管路、油箱等系统构成，主要实现对油缸（千斤顶）、活塞启动、后退、停止、压力大小、速度快慢的控制。
■微机控制电液测控系统见后。
Third, the structure:
The horizontal static load anchoring machine is composed of a main machine and a control cabinet (including an oil source, a pump station) and a microcomputer control system.
■ Host: It consists of load sensors, racks, hangers, lifting beams, coamings, jacks and pads, anchor plates, anchors, etc. Among them, the anchor plates, anchors and pads are replaced with different anchor plates and anchors according to different test root numbers.
■Control cabinet: It consists of control panel, motor pump, oil supply valve, oil return valve, globe valve, electromagnetic reversing valve, electro-hydraulic servo digital valve, pipeline, fuel tank, etc. It mainly realizes the cylinder (jack) and piston. Start, retreat, stop, pressure, speed control.
■ Microcomputer controlled electro-hydraulic measurement and control system is shown below.
