H8800-7C直驱三自动（圆刀）电脑高速平缝机

1.优化的内置式专利直驱伺服马达；圆刀剪线设计；低振动、低噪音、安装方便、清洁环保；结合了航空航天技术，起缝、停车迅速、停针定位精准，0至4000针的转换只需0.12秒；无“V”字型皮带传动，彻底解决了因皮带摩擦而产生的料屑污染、皮带缠线的问题，并且大大减少停车、提速时的故障率，提高缝制效率。

The patented optimal inserted direct-drive servomotor. Rotary cutter. Convenient installation, cleannon-polluted, low noisevibration. Combined with aerospace technology, high speed startup/brake, precise needle stop locating. It only takes 0.12s from 0 to 4000 stitches. The absence of V-belt avoids belt abrasionspooling thoroughly. Reduce greatly the failure rateimprove highly sewing efficiency.

2.与普通电机相比，本机操作系统省电60%左右，同比变频伺服马达省电30%以上。

High power saving: save about 60% of energy compared with the common motors, 30% up with frequency servo motor.

3.采用了参数设定改变踏板起缝，操作简便；显示故障代码便于故障的确认与排除。

Parameter setting the startup makes the operation easy; the error codes will show on the

panel for faults confirmationelimination.

4.缝制结束以后，剪完线头只剩下4-5mm，无需进行线屑清除的作业。

Thread end lefts only 4-5mm after stopping, so it isn''t necessary to remove the litters.

5.如果按下手动倒缝开关（设置在机针附近的开关），即可进行倒缝工作，操作十分方便。

Press manual reverse stitching switch (near to needle), perform the operation very easily.